The Pfeifer Roof
It takes more than shingles to protect your building
When you choose Pfeifer, we’ll install a Total Protection Roofing System™ made up of essential roofing components that are designed to work together to maximize your roof’s performance, appearance, and durability.
Your residential roof replacement will be installed by skilled craftsmen who undergo constant training, who pay attention to every detail, and who take great pride in their work. When only a total protection roofing system will do, call the craftsmen who care.
Total Protection Roof Replacement
Total protection means sealing your roof from wind-driven rain, and areas of your roof where water and ice have a tendency to collect or flow.
We use super strong, self-adhering WeatherLock leak barrier products in valleys, chimneys, and skylights to completely seal your roof at these critical areas.
Next, we’ll install the latest generation of roofing underlayment, a durable, synthetic layer of protection under your shingles.
This new product lays flat, is resistant to buckling and splitting under heat and humidity, and provides a uniform base for your shingles.
We’ll then lay a course of starter shingles on all eaves and rakes to prevent edge penetration by dripping or flowing water. The starter shingles also build the edge of your roof, providing a finished appearance. We use special starter shingle products specifically designed for the starter row.
High Performance Meets Curb Appeal
We offer a virtually limitless range of laminated, fiberglass-reinforced shingles that incorporate advanced sealants to promote wind uplift resistance, while maintaining flexibility. You can choose shingles that mimic rustic wood shake, natural slate, or designer variations that provide bold contrast and deep dimension, or warm, clean, and inviting textures to match the architecture of your home and your personal preference.
Vented Ridge System
Properly ventilating your attic is one of the best ways to increase the longevity and performance of your roof. Our knowledgeable estimators will analyze your home’s conditions and make recommendations for adding ventilation. We offer both the Owens Corning Inflow and Owens Corning VentSure Continuous Vented Ridge Systems.
The Owens Corning™ Total Protection Roofing System™
Block water resulting from ice damming, wind-driven rains and normal water flow. A properly sealed roof helps prevent rot and mold.
Add a tough, yet beautiful layer of defense with strong adhesion that resists blow offs and helps shed water away from the roof deck. Helps protect the most vulnerable areas such as eaves and peaks.
Reduce heat and moisture buildup that can lead to ice damming, roof deterioration and mold infestation. Helps air flow through the attic to manage temperature and moisture.
A Roof for Every Structure
We welcome all types of roof projects, from new construction to elaborate custom residential roof replacement renovations. Some of our most popular roofs are composition shingles, wood shakes, tile, and metal roof systems. We also specialize in low slope roofs.
Not only do they increase the character and curb appeal of your home, they also provide excellent protection to your roof’s peak. Owens Corning™ Shingles provide an important finishing element to your roof.
When you have a Total Protection Roofing System, you have the opportunity to increase your protection with one of several Owens Corning Roofing System Limited Warranties, which extend the coverage of your roofing components and may even provide workmanship coverage.
Wood Shakes and Wood Shingles
Natural and durable, the world’s most enduring roofing material was made by nature. Cedar. For years manufacturers have tried to duplicate the natural beauty and durability of cedar shakes and shingles.
While imitation is flattering, it does not approach the integrity of the original. Cedar is prized for its natural beauty and durability in tough climate conditions.
For hundreds of years cedar shakes and shingles have protected homes from harsh conditions.
Tile Roof Systems
Tile roofs are a beautiful way to complement Mediterranean and Mission style architecture. Tile comes in a variety of styles and colors, and offer a timeless southwestern charm!
Our Boral shake and slate tile roofing system offers a collection of components that, when used comprehensively, result in a superior tile roof installation. Our roofs offer the highest functionality, performance and energy efficiency available.
Metal Roof Systems
We install metal roofs and recommended different metal roof solutions depending on your unique needs. We use products from manufacturers such as Taylor Metal Products, among others. We offer all metal roof products. However, the most common metal roof we install uses a snap and lock panel system.
Metal roofs are durable, fire retardant, and low maintenance. They are energy efficient as metal reflects heat and blocks its transfer into the house.
The initial cost of a premium metal residential roof replacement can be higher than other roofing materials, but if you calculate the lifecycle cost, a metal roof can prove to be a better investment than some other types of roofing.
We are proud to offer the Versa-Span™ metal roofing system, which combines the strength of steel fluted pans with a lock-action rib design. Concealed fasteners are leak-proof and enable installation on low pitched roofs. The long-length roof panels are strong, durable, and versatile and come in a variety of colors and finishes.
Easy Lock™ Standing Seam System
The ultimate in a Standing Seam pattern. Easy Lock™ is appreciated for both its beauty and function. The panels provide one foot wide coverage with concealed fastening screws and a 1-1/8″ high snap-together lock seam, and lengths up to 50 feet. This system allows application down to 1/2″ in 1 foot pitch with fasteners being applied to the pre-slotted flange along one side of the panel. The next panel easily snaps and locks over the flange area, completely concealing the flathead screws, and provides a secure roof in winds up to 140 mph.
Most metal roofing uses exposed fasteners with a neoprene seal. However, expansion/contraction ovoids the fastener holes and sunlight shrinks the washer. Hence, exposed fastener roofing will eventually leak. The roofing panels designed by Taylor Metal Products have concealed fasteners which are not exposed and cannot leak – ever. The fasteners are applied through a pre-slotted flange on the side of the panel. The next panel easily snaps and locks over the flange area, completely concealing the screws, and providing a secure roof in winds up to 140 mph. No clips, special closures, or mechanical seaming are used. Where “dry” is important, a concealed fastener is a must!
The exclusive Easy-Lock™ system incorporates an air space on the snap leg side between inner and outer ribs. This prevents water siphoning by wind pressure and capillary action. The resulting ventilated dry seam eliminates joint corrosion and fastener rust out.
VersaSpan for Commercial Applications by Taylor Metal Products
Versa-Span™ system is a strong, durable, versatile, long length roof panel. It combines the strength of steel fluted pans and a lock-action rib design. Which together with concealed fasteners, enables installation on low pitched roofs.
- 12˝ to 18˝ coverage options available
- 24 and 22 Tru-Gauge™
- Floating clip system: allows for expansion/contraction of panels in longer lengths
- Onsite roll forming available for long lengths
A metal roof is a great investment for any business. Metal roofing materials are significantly more durable than other commercial roofing options. Monthly energy costs, maintenance costs, and resale value are all things to keep in mind when replacing a roof.